1. Clean Category 1 Water Caught Within 24 Hours (In-Place Extraction)
If the water came from a clean supply line, water heater inlet, or ice maker, and drying starts within the first 24 hours:
- Standard Rebond Pad (No Plastic Skin): We use a weighted extraction tool connected to a truck-mounted vacuum. It presses the carpet and pad down against the slab and pulls most of the trapped water out through the fibers without removing the carpet from the tack strips. We then dry the carpet with air movers and LGR dehumidifiers, often saving both carpet and pad in 48 to 72 hours.
- Pad With a Plastic Moisture Barrier: Many newer pads have a thin plastic film on top. Once water gets under that film, vacuuming from above cannot pull it out. In that case, we lift one corner of the carpet, remove the wet pad, sanitize and dry the slab, and reinstall the saved carpet over new pad.





